Dispensing nozzle PVDF
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12mm)
. The dispensing nozzle is sealed with an FPM seal.
- FFPM or FEP / FPM seals are available at extra cost on request
- Connection: external thread G 1 1/4"
- Optionally available as a variant with a push-button for direct operation of the relay module (no communication module required)
Features & benefits
- Simple adjustment of the volume flow
- Easy to operate
- Safe filling and Decanting the respective liquid
| Accessories group: | Nozzles |
|---|---|
| Delivery rate (up to max. l/min)*: | 50 |
| Housing (material): | Polyvinylidene fluoride carbon fibre reinforced (PVDF) |
| Operating pressure (max. bar): | 3 |
| Product group: | Drum pumps / container pumps |
| Pumped liquid temperature (max °C): | 80 |
| Static seal (material): | FPM (fluororubber) |
| Thread (inch) external: | 1 1/4" |
| Type: | Dispensing nozzle PVDF |
| Viscosity (up to max. mPas)*: | 760 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
