Dispensing nozzle PP
*Illustration may differ from the actual product
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
- Connection: external thread G 1 1/4"
Features & advantages
- Simple adjustment of the volume flow
- Safe filling or decanting of the respective liquid
- Easy to operate
| Accessories group: | Nozzles |
|---|---|
| Delivery rate (up to max. l/min)*: | 50 |
| Gewinde (Zoll) außen: | 1 1/4" |
| Housing (material): | PP (Polypropylen) |
| Operating pressure (max. bar): | 3 |
| Product group: | Fasspumpen / Containerpumpen |
| Pumped liquid temperature (max °C): | 50 |
| Static seal (material): | EPDM, FEP / FPM, FPM (fluororubber) |
| Typ: | Zapfpistole PP |
| Viscosity (up to max. mPas)*: | 760 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.