Chlorinator C 2526
*Illustration may differ from the actual product
The C 2526 chlorinators are based on a clear modular system. Whether as a compact device with all functions in a free-standing cabinet or as functional modules for customised system design - you always have a reliable vacuum system at your disposal.The dosing quantity is set manually on devices in the basic version and displayed on the highly resistant glass variable area flow meter. Devices with an automatic control valve allow the dosing quantity to be adjusted remotely using standard signals, and the control valve has a nozzle system that has been specially developed for use with chlorine gas - highly chemically resistant and insensitive to dirt.
Features & benefits
- up to 25 kg/h
- Flow meter with manual adjustment
- Highly chemically resistant materials
- Automatic control valve (optional)
- Signal converter (optional)
- back pressure regulator
- vacuum gauge
| MATCHCODE: | 0209S010KL3DB11 |
|---|---|
| Funktionen:: | C 2526 ist ein Vakuum-Dosiergerät nach DIN 19606 und wird zur |
| Typ:: | C 2526 |
| Anschlüsse:: | PVC-Verschraubung Ø20 |
| automatisches Regelventil:: | 230 V AC, Ein: [0]4 - 20 mA, Aus: [0]4 - 20 mA |
| Medium:: | Chlorgas |
| Manometer (-1 - 0 bar):: | ohne Kontakt |
| Montageart:: | Schrankgerät |
| Signalwandler:: | 110 - 240 VAC [0]4 - 20 mA |
| Funktion-2: | Dosierung von Chlorgas eingesetzt. |
| Funktion-3: | Das Ausströmen von Gasen ist unmöglich, |
| Funktion-4: | weil der Druck in allen Teilen des Dosiersystems niedriger ist |
| Funktion-5: | als der Atmosphärendruck. |
| Funktion-6: | Bodenmontiertes Gerät mit folgenden Elementen: |
| Funktion-7: | - Vakuumtechnik nach DIN 19606 |
| Funktion-8: | - Glas-Durchflussmesser |
| Funktion-9: | - Chemisch hoch beständige Werkstoffe |
| Funktion-10: | - Automatisches Regelventil [Option] |
| Funktion-11: | - Signalwandler [Option] |
| Funktion-12: | - Hinterdruckregler |
| Funktion-13: | - Vakuummeter |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter