Centrifugal submersible pump B6
*Illustration may differ from the actual product
Description:
High performance, compact dimensions, low weight - the Lutz B6 has it all. The pump shaft is protected by a shaft guide tube against any "attack" from the pumped liquid. Perfectly suited for pumping and emptying neutral and aggressive liquids with low solids content.
- Also available in special immersion depths of 1000 - 3000 mm on request
- Designed according to the single-pipe principle
- Application examples: For pumping and circulating chemicals and solutions in surface treatment, the chemical industry and water treatment, etc.
Features & advantages
- Wide range of possible applications
- no risk of leakage at the floor drain due to safe product removal
- Low wear and tear
- Stationary installation possible via flange
- also for small container openings
| Ausführung/Ausstattung: | Vertical |
|---|---|
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 9, 11 , 12, 15 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Flow rate (up to max. m³/h)*: | 24, 33 , 42, 56 |
| Gewinde (Zoll) außen: | 2 3/4" |
| Mechanical seal (material): | Keramik,FPM,HC |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | PP (polypropylene) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber) |
| Tauchrohrdurchmesser (max. mm): | 166 |
| Typ: | B6/15 PP, B6/30 PP, B6/45 PP, B6/60 PP |
| Viscosity (up to max. mPas)*: | 1200, 2000, 3000, 4000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.