Description:
When circulating chemicals and pickling baths, reliability, safety and, last but not least, functionality are essential. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid draining of these liquids from tanks and basins.
- Available in special immersion depths on request
- equipped with self-lubricating, liquid-wetted slide bearings.
Features & advantages
- High pumping capacity
- quiet running
- low space requirement
- Simple commissioning
- Easy to maintain
- high efficiency
Conveyor wheel (material): | PPO (polyphenylene oxide) / PPE (polyphenylene ether) |
---|---|
Conveyor wheel shape / drive type: | Radial-flow impeller |
Delivery head (up to max. mWS)*: | 22 |
Delivery rate (up to max. l/min)*: | 200 |
Density (up to kg/dm³): | 1.8 |
Design/equipment: | Vertical |
Drive shaft (material): | Stainless steel (1.4571) |
Immersion depth (mm): | 1100 |
Immersion tube diameter (max. mm): | 100 |
Mechanical seal (material): | Kohle, SiC, HC-4 (2.4610) |
Pumped liquid temperature (max °C): | 40 |
Pumping unit material (material): | PP (polypropylene) |
Seal type: | mechanical seal (MS) |
Static seal (material): | FPM (fluororubber) |
Thread (inch) external: | 1 1/2" |
Type: | B50 PP/ SS |
Viscosity (up to max. mPas)*: | 100 (e.g. milk) |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter