Canister - Pumping unit set 20/30 L
*Illustration may differ from the actual product
Available, delivery time: 2-5 days
Product information "Canister - Pumping unit set 20/30 L"
Canister pumping stations
The new battery-powered canister pump offers a clean and safe solution for emptying canisters quickly. With a replaceable battery and quick-release fastener, the pump remains flexible and easy to use. Perfect for use on different containers without causing contamination.
Highlights at a glance:
- Simple and quick change of the battery-powered drive unit
- Can be used anywhere without a power source
- No contamination of the media and the surrounding area
- Quick and easy to use thanks to lightweight equipment
- Ergonomic filling
- Infinitely variable to reduce the risk of accidents caused by splashing
- precise filling/dosing of small quantities possible
Canister pumps
- for clean and fast emptying of canisters & small drums
- Various lengths available: 440 mm, 500 mm, 700 mm
- Flexible hose set with ball valve
- precise filling/dosing of small quantities possible
| Bearing (material): | ETFE / PTFE |
|---|---|
| Capacity (Ah): | 4 |
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 12 |
| Delivery rate (up to max. l/min)*: | 6 |
| Delivery rate with nozzle (up to max. l/min)*: | 22 |
| Density (up to kg/dm³): | 1.6 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Drive type: | Battery |
| Hose length (mm): | 1500 |
| Immersion depth (mm): | 440, from 500 mm, up to 500 mm |
| Immersion tube diameter (max. mm): | 32 |
| Mechanical seal (material): | no seals in contact with the medium |
| Power (W): | 260 |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | PE (polyethylene) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Thread (inch) external: | 1" |
| Viscosity (up to max. mPas)*: | 400 |
| Voltage (V): | 21,6 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Similar Items
