Battery pump set - Robust
*Illustration may differ from the actual product
Delivery time 5 days
The versatile helper for your chemical applications
With the "Robust" B2 Battery pump set, you have a flexible and powerful partner for dispensing oil-based lubricants (PPS), low-viscosity oil products, diesel and heating oil. Ideally suited for small containers such as canisters or hobbocks, this set enables you to work efficiently and conserve resources. Perfect for anyone who needs flexibility and reliability when handling chemicals.
Highlights at a glance:
- Simple and quick change of the battery-powered drive unit
- Can be used anywhere without a power source
- No contamination of the media and the surrounding area
- Quick and easy to use thanks to lightweight equipment
- Ergonomic filling
- Infinitely variable to reduce the risk of accidents due to splashing
- precise filling / dosing of small quantities possible
| Bearing (material): | ETFE / PTFE |
|---|---|
| Capacity (Ah): | 4 |
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Axial-flow rotor, Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 12 |
| Delivery rate (up to max. l/min)*: | 65 |
| Delivery rate with nozzle (up to max. l/min)*: | 22 |
| Density (up to kg/dm³): | 1.6 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Drive type: | Battery |
| Hose length (mm): | 1500 |
| Immersion depth (mm): | from 1000 mm, from 1500 mm |
| Immersion tube diameter (max. mm): | 32 |
| Mechanical seal (material): | no seals in contact with the medium |
| Power (W): | 260 |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | Alu (Aluminium), PP (polypropylene) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Thread (inch) external: | 1" |
| Viscosity (up to max. mPas)*: | 400 |
| Voltage (V): | 21,6 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Similar Items
