Battery pump set - B2 Battery PP
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The B2 Battery pump set is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources. The set is supplied without battery and charger
- Replaceable, powerful rechargeable battery with Li-Ion
- Battery life approx. 35 min at maximum speed
- 1 battery charge empties approx. 12 x 200 litre containers
Features & benefits
- BLDC motor with high efficiency of up to 70%
- Infinitely variable
- Long battery life
- Automatic switch-off in case of overload
- Sophisticated quick-release fastener
| Bearing (material): | ETFE / PTFE |
|---|---|
| Capacity (Ah): | 4 |
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Axial-flow rotor, Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 8, 12 |
| Delivery rate (up to max. l/min)*: | 65, 80 |
| Density (up to kg/dm³): | 1.6 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Drive type: | Battery |
| Fördermenge mit Zapfpistole (bis max. l/min)*: | 22 |
| Gewinde (Zoll) außen: | 1" |
| Hose length (mm): | 1500 |
| Immersion depth (mm): | from 500 mm, from 1000 mm, from 1500 mm, up to 500 mm |
| Mechanical seal (material): | no seals in contact with the medium |
| Power (W): | 260 |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | PP (polypropylene) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Suitable media: | Akkusäure, Ammoniakwasser, Fotoentwickler, Fotofixierer, Glykol, Phosphorsäure, Salzsäure, Wasserstoffperoxid |
| Tauchrohrdurchmesser (max. mm): | 32 |
| Viscosity (up to max. mPas)*: | 400 |
| Voltage (V): | 21,6 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.