Battery barrel pump - B2 Battery PVDF
Battery
Fasspumpe
*Illustration may differ from the actual product
Available, delivery time: 2-5 days
Product number:
0207-109
Product information "Battery barrel pump - B2 Battery PVDF"
Description:
The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources.
- Replaceable, powerful rechargeable battery with Li-Ion
- Battery life 35 min at maximum speed
- 1 battery charge empties approx. 12 x 200 litre containers
Features & benefits
- BLDC motor with high efficiency of up to 70%
- Infinitely variable
- Long battery life
- Automatic switch-off in case of overload
- Sophisticated quick-release fastener
| Bearing (material): | ETFE / PTFE |
|---|---|
| Capacity (Ah): | 4 |
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 8 |
| Delivery rate (up to max. l/min)*: | 80 |
| Density (up to kg/dm³): | 1.6 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Drive type: | Battery |
| Immersion depth (mm): | up to 500 mm |
| Immersion tube diameter (max. mm): | 32 |
| Mechanical seal (material): | no seals in contact with the medium |
| Power (W): | 260 |
| Pumped liquid temperature (max °C): | 90 |
| Pumping unit material (material): | PVDF (polyvinylidene fluoride) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Suitable media: | Chloric acid, Chromic acid, Hydrofluoric acid, Natriumhypochlorit, Nitric acid, Schwefelsäure |
| Thread (inch) external: | 1" |
| Viscosity (up to max. mPas)*: | 400 |
| Voltage (V): | 21,6 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Battery
Fasspumpe
Battery barrel pump - B2 Battery PP
for concentrated acids and alkalis
Description:
The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources.
Replaceable, powerful rechargeable battery with Li-Ion
Battery life 35 min at maximum speed
1 battery charge empties approx. 12 x 200 litre containers
Features & benefits
BLDC motor with high efficiency of up to 70%
Infinitely variable
Long battery life
Automatic switch-off in case of overload
Sophisticated quick-release fastener
Battery
Fasspumpe
Battery barrel pump - B2 Battery Niro
for concentrated acids and alkalis
Description:
The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources.
Replaceable, powerful rechargeable battery with Li-Ion
Battery life 35 min at maximum speed
1 battery charge empties approx. 12 x 200 litre containers
Features & benefits
BLDC motor with high efficiency of up to 70%
Infinitely variable
Long battery life
Automatic switch-off in case of overload
Sophisticated quick-release fastener
Accessory Items
Battery
Fasspumpe
Dispensing nozzle PVDF
for concentrated acids and alkalis
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12mm). The dispensing nozzle is sealed with an FPM seal.
FFPM or FEP / FPM seals are available at extra cost on request
Connection: external thread G 1 1/4"
Optionally available as a variant with a push-button for direct operation of the relay module (no communication module required)
Features & benefits
Simple adjustment of the volume flow
Easy to operate
Safe filling and Decanting the respective liquid
Battery
Fasspumpe
IBC traverse
for concentrated acids and alkalis
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Battery
Fasspumpe
Charger 24V
for concentrated acids and alkalis
Description:
The charger is suitable for the B3 Battery motor battery.
additional wall mounting possible
The battery is not included in the scope of delivery
Features & advantages
with integrated LED display
fast charging times for 2Ah max. 1h / for 4Ah max. 2h
long service life
high cycle stability
Battery
Fasspumpe
TR3 flow meter (PVDF)
for concentrated acids and alkalis
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PVDF for highly aggressive liquids
Examples of media: Chlorine bleach, nitric acid, sulphuric acid, ...
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
Battery
Fasspumpe
Foot strainer PP
for concentrated acids and alkalis
Description:
For attaching to the pump foot. This keeps coarse impurities away from the rotating parts so that wear and tear on the pump can be reduced.
Is placed on the pump base
Features & benefits
Protects important parts from contamination
Reduces wear and tear on the pump
Battery
Fasspumpe
Barrel adapter PP
for concentrated acids and alkalis
Description:
The drum adapter stabilises the pumping unit or pump in the drum or container opening and prevents the pump from tipping over when the drum is empty.
Detailed information on the various container openings is available on request
for the B2 pumping unit
Features & advantages
Stabilisation of the drum pump
Protection against the pumping unit falling out
Battery
Fasspumpe
Battery 24 V
for concentrated acids and alkalis
Description:
The battery is suitable for the B2 Battery battery motor and consists of high-quality Li-Ion cells.
1 battery charge empties approx. 12 x 200 litre containers
available as 2Ah or 4Ah battery
The charger is not included in the scope of delivery
Features & advantages
Robust housing
long service life
high cycle stability
Voltage: 24 V
Battery
Fasspumpe
