Barrel pump connection
*Illustration may differ from the actual product
Description:
The drum pump connection is required to connect the HDO 250P/HDO 250 flow meter to a B70V or HD-E progressive cavity pump. To connect the HDO 250 Ex version flow meter to an eccentric worm-drive pump, it is necessary to use the stainless steel version of the conductive drum pump connection.
- Materials: PP / stainless steel
Features & advantages
- Connection: 1" male thread to 1 1/4" female thread / 1" male thread to 1 1/2" female thread
- PTFE seals
| Accessories group: | Connections |
|---|---|
| Product group: | Durchflussmesser, Exzenterschneckenpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter