B70V progressive cavity pumping unit in PURE design
*Illustration may differ from the actual product
Delivery time 2-3 weeks (approx. 10-15 working days)
Description:
The progressive cavity pump B70V-D 120.1 in PURE design is a powerful positive displacement pump for highly viscous and viscous media up to the limits of flowability. Depending on the application, various geared motors are available, which can be combined with the pumping unit at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths
- Examples of media: viscous cosmetic products, food, etc.
Features & advantages
- Uniform volume flow
- Quick and easy cleaning
- Gentle, low-pulsation product conveying
- Smooth running and low wear
- Large selection of robust and powerful drive motors
- Drive motor optionally with integrated frequency inverter.
| Certification: | FDA-compliant, Verordnung (EG) 1935/2004 |
|---|---|
| Connection: | Tri-Clamp |
| Conveyor wheel shape / drive type: | Gelenkwelle (hochviskose Medien) |
| Delivery head (up to max. bar)*: | 6 |
| Delivery rate (up to max. l/min)*: | 120 |
| Drive shaft (material): | Stainless steel (1.4571) |
| Immersion depth (mm): | 1100 |
| Mechanical seal (material): | WC, WC, FPM |
| Pressure connection (DN): | 50 |
| Pump diameter (max. mm): | 131 |
| Pumped liquid temperature (max °C): | 140 |
| Pumping unit material (material): | Edelstahl (1.4571) |
| Rotor (material): | Stainless steel (1.4571) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber) |
| Stator (material): | PTFE (polytetrafluoroethylene) |
| Stator size: | 120.1 |
| Type: | B70V Pure |
| Viscosity (up to max. mPas)*: | 100000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
