Skip to main content

B200 Niro* pumping station

Product information "B200 Niro* pumping station"

Description:

The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps.
Depending on the application, various motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources.

  • Horizontal connection at the bottom of the container
  • Pumping unit equipped with Lutz Original handwheel
  • Also for alcoholic foods, cosmetics and pharmaceutical products as well as flammable cleaning agents

Features & benefits

  • Optionally with electric or compressed air drive
  • Low loss of medium when disconnecting
  • Physiologically safe design (PURE)
  • Hygienic/aseptic connections
  • Small space requirement
  • Suitable for food contact in accordance with EC 1935/2004 and FDA
  • Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Bearing (material): Edelkohle
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004
Connection: Tri-Clamp
Conveyor wheel (material): ETFE (ethylene-tetrafluorethylene copolymer)
Conveyor wheel shape / drive type: Radial-flow impeller
Delivery head (up to max. mWS)*: 20
Delivery rate (up to max. l/min)*: 117
Density (up to kg/dm³): 2.8
Drive shaft (material): Stainless steel (1.4571)
Explosion protection: Yes
Pumped liquid temperature (max °C): 100
Pumping unit material (material): Niro (Edelstahl)
Seal type: mechanical seal (MS)
Static seal (material): FPM (fluororubber)
Suitable media: Acids, Care products, Cleaning agents, Disinfectant, Emulsions, Lye, Lösemittel, Mineral oils, Vegetable oils, Wasser
Tri-Clamp connection (DN): 32
Type: B200 Niro 41-L-GLRD
Viscosity (up to max. mPas)*: 1000

* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Accessory Items

slide 1 to 5 of 5

Similar Items

slide 1 to 2 of 2