B200 Niro* pumping station
*Illustration may differ from the actual product
Description:
The horizontal pumping station is suitable for emptying highly aggressive, low-viscosity, flammable and explosive liquids from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Depending on the application, various motors are available that can be combined with the pumping unit at any time.
This gives you flexibility at all times and saves important resources.
- Horizontal connection at the bottom of the container
- Pumping unit equipped with Lutz Original handwheel
- Suitable for emptying alternative fuels, oils and flammable liquids
Features & advantages
- Optionally with electric or compressed air drive
- Low loss of medium when disconnected
- Explosion-proof versions for applications in hazardous areas
(Zone 1 and 2) - Easy to dismantle
- Small space requirement
| Bearing (material): | Edelkohle |
|---|---|
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 20 |
| Delivery rate (up to max. l/min)*: | 117 |
| Density (up to kg/dm³): | 2.8 |
| Drive shaft (material): | Edelstahl (1.4571) |
| Gewinde (Zoll) außen: | 1 1/4" |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber) |
| Suitable media: | Desinfektionsmittel, Emulsionen, Laugen, Lösemittel, Mineralöle, Pflanzenöle, Pflegemittel, Reinigungsmittel, Säuren, Wasser |
| Typ: | B200 Niro 41-L-GLRD |
| Viscosity (up to max. mPas)*: | 1000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
Similar Items
To enquire this product, please log in here.