B200 Niro* pumping station
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps.
Depending on the application, various motors are available that you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources.
- Horizontal connection at the bottom of the container
- Pumping unit equipped with Lutz Original handwheel
- Also for alcoholic foods, cosmetics and pharmaceutical products as well as flammable cleaning agents
Features & benefits
- Optionally with electric or compressed air drive
- Low loss of medium when disconnecting
- Food-safe connections
- Small space requirement
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
- Approved according to FDA and Regulation (EC) 1935/2004
| Bearing (material): | Edelkohle |
|---|---|
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004 |
| Connection: | Tri-Clamp |
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 15 |
| Delivery rate (up to max. l/min)*: | 244 |
| Density (up to kg/dm³): | 2.8 |
| Drive shaft (material): | Edelstahl (1.4571) |
| Explosion protection: | Yes |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber) |
| Suitable media: | Desinfektionsmittel, Emulsionen, Laugen, Lösemittel, Mineralöle, Pflanzenöle, Pflegemittel, Reinigungsmittel, Säuren, Wasser |
| Tri-Clamp connection (DN): | 32 |
| Typ: | B200 Niro 41-R-GLRD |
| Viscosity (up to max. mPas)*: | 1000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
