Automatic nozzle aluminium
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
For filling and transferring flammable and highly flammable liquids. The dispensing nozzle housing is made of aluminium and the internal parts are made of brass or POM material.
The dispensing nozzle is equipped with an automatic shut-off device with a ball-tilt safety trigger and is sealed with a PTFE seal.
- Connection: external thread G 1"
- Swivelling hose connection possible
Features & advantages
- Safe filling or decanting of the respective liquid
- Easy to operate
- Automatic switch-off
- for pumping in potentially explosive environments
| Accessories group: | Nozzles |
|---|---|
| Delivery rate (up to max. l/min)*: | 80 |
| Explosion protection: | Yes |
| Gewinde (Zoll) außen: | 1" |
| Housing (material): | Alu (Aluminum) |
| Operating pressure (max. bar): | 4 |
| Product group: | Fasspumpen / Containerpumpen |
| Pumped liquid temperature (max °C): | 60 |
| Static seal (material): | PTFE (Polytetrafluorethen) |
| Typ: | Automatische Zapfpistole Alu |
| Viscosity (up to max. mPas)*: | 7 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.