Aluminium pumping station
Stainless steel shaft
Rotor
*Illustration may differ from the actual product
Product number:
0132-300
Product information "Aluminium pumping station"
Description:
The Lutz pumping station (aluminium) is suitable for low-viscosity, aggressive and non-flammable media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz Original handwheel
- Suitable for filling or transferring alternative fuels
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimised drum emptying
- Universally resistant ETFE shaft bearing
- Maintenance without special tools
- Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
| Bearing (material): | ETFE |
|---|---|
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 12 |
| Delivery rate (up to max. l/min)*: | 170 |
| Density (up to kg/dm³): | 1.4 |
| Drive shaft (material): | Stainless steel (1.4571) |
| Immersion depth (mm): | from 500 mm |
| Immersion tube diameter (max. mm): | 41 |
| Mechanical seal (material): | no seals in contact with the medium |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Alu (Aluminium) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Thread (inch) external: | 1 1/4" |
| Type: | Alu 41-R-DL |
| Viscosity (up to max. mPas)*: | 350 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Stainless steel shaft
Rotor
Aluminium pumping station
for mineral oils
Description:
The Lutz pumping station (aluminium) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant ETFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
Accessory Items
Stainless steel shaft
Rotor
Mineral oil hose set
for mineral oils
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose set is made of PVC with an embedded and galvanised steel wire helix. The set is used for connection to the pumping station or the dispensing nozzle.
Also available in special lengths on request
Features & advantages
Nominal diameter DN 25 (1")
Aluminium hose connection
Pre-assembled hose connections and hose clamps
Stainless steel shaft
Rotor
Hose connection
for mineral oils
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
Stainless steel shaft
Rotor
Barrel adapter
for mineral oils
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
Stainless steel shaft
Rotor
Suspension device
for mineral oils
Description:
The suspension device is used to store the drum pumps and prevents them from falling over.
For pumping stations with handwheel
Features & advantages
Protects against falling over
Increases the utility value
Stainless steel shaft
Rotor
IBC traverse
for mineral oils
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Stainless steel shaft
Rotor
Flow meter MDO 2
for mineral oils
Description:
The flow meter with display impresses with its simple, needs-based display, ease of use and compact design. Thanks to the rotating oval wheel meter and a magnet integrated in the measuring chamber, it enables accurate measurement of the volume flow and measures mineral oils and alternative fuels precisely, quickly and, above all, efficiently.
Suitable for measuring alternative fuels
Features & advantages
Measurement according to the oval gear principle
High measuring accuracy
Low pressure losses in the system
Measuring range from 3 l/min - 80 l/min
Low frictional resistance
Stainless steel shaft
Rotor
Foot strainer
for mineral oils
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel pumping units. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Features & advantages
Prevents contamination in the pumping station by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
Stainless steel shaft
Rotor
Outlet bend
for mineral oils
Description:
The discharge elbow enables the direct transfer or filling of liquids into another container. They are available in PP, aluminium and stainless steel and are screwed onto the pump outlet.
Nominal sizes: DN 19 / DN 25
Features & advantages
Enables liquids to be transferred quickly and directly
Union nut (1 1/4")
Stainless steel shaft
Rotor
Mineral oil hose
for mineral oils
Description:
The hose is suitable for mineral oil products of all types and super up to 50% aromatics and methanol content. The inner rubber is made of NBR and the outer rubber of either CR (chloroprene) or NBR. The hose is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal width: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
Operating pressure up to max. 16 bar
Colour coding: "Yellow"
Stainless steel shaft
Rotor
Aluminium nozzle
for mineral oils
Description:
For transferring and filling mineral oils, heating oil and diesel. The dispensing nozzle housing and valve plug are made of aluminium and are equipped with a swivel joint and a protective bracket.The dispensing nozzle is sealed using an NBR seal.
Connection: Female thread G 1"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure