Aluminium nozzle
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
For transferring and filling mineral oils, heating oil and diesel. The dispensing nozzle housing and valve plug are made of aluminium and are equipped with a swivel joint and a protective bracket.
The dispensing nozzle is sealed using an NBR seal.
- Connection: Female thread G 1"
Features & advantages
- Safe filling or decanting of the respective liquid
- Easy to operate
- Swivel joint ensures tightness at high pressure
| Accessories group: | Nozzles |
|---|---|
| Delivery rate (up to max. l/min)*: | 60 |
| Gewinde (Zoll) innen : | 1" |
| Housing (material): | Alu (Aluminum) |
| Operating pressure (max. bar): | 4 |
| Product group: | Fasspumpen / Containerpumpen |
| Pumped liquid temperature (max °C): | 60 |
| Static seal (material): | NBR (Acrylnitril-Butadien-Kautschuk) |
| Typ: | Zapfpistole Alu |
| Viscosity (up to max. mPas)*: | 760 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter