Warm water disinfection and cold water circuits with chlorine dioxide (ClO₂)

Chlorine dioxide system EASYZON 5 The right dose of disinfection EASYZON 5 is a compact chlorine dioxide system for the on-site production of chlorine dioxide that is characterised by the high product stability of the chlorine dioxide. The concentrated stock solution is produced on site and is still effective after a storage period of 24 hours. The system uses the acid-chlorite process in batch operation and utilises standard commercial concentrations of hydrochloric acid and sodium chlorite. Peristaltic pumps enable chemicals to be transported safely. Features & advantages High product stability Compact, pre-assembled unit Integrated monitoring of all functions several injection points can be supplied from one system Production directly on site Long-term stable disinfection power Disinfection is effective even at high pH values

Your versatile partner in measurement and control technologyWithits modular design, the multi-channel controller proves to be an adaptable and extremely competent companion for various measurement and control tasks. The modularity of the multi-channel controller makes it possible to record a wide range of measurement parameters such as chlorine, pH value, redox value or even quadruple pH value measurements in any conceivable combination,and the outputs are also freely selectable. Dosing pumps can be controlled via optocouplers or relays, as well as actuators via relays or a 20 mA output.The colour display with a very high resolution shows a user-friendly user interface. The user-friendliness is rounded off by simple touch operation and multilingual, intuitive menu navigation.Free digital outputs can be configured as required. Regardless of whether they are to switch in the event of low sample water, measured value overflow, measured value underflow or other possible alarm triggers: There are no limits to the configuration.You can use the four analogue outputs (0/4 - 20 mA) or the network capability to forward measured values to a web browser or a remote control station. An adjustable time interval can be used, for example, to automatically remind you to replace sensors due to wear and tear, anddata such as measured values, settings and alarm messages can be easily saved to a USB stick via a USB interface. Core functions of the multi-channel controller at a glance: Modular design of the inputs and outputs Up to four sensors and up to four additional temperature sensors Freely configurable overviews Differential value measurement (e.g. ∆pH) Graphic display of the setpoint deviation Up to four setpoint sets can be configured and loaded via digital input or timer control Service entries and sensor changes can be saved Limit value control (can be used as DIN contact for partial load operation in accordance with DIN 19643) 1 - 9 potential-free relay outputs Web server and Modbus protocol via Ethernet Trend display Large colour touch display Data storage on a USB stick