Treating swimming and wading pool water in the swimming pool

The C 2213 is designed for both individual and parallel use of several vacuum regulators in battery operation. A heated droplet separator is optionally available for use on gas drums on the pressure side. Features & benefits Throughput capacity with chlorine gas: up to 10 kg/h Residual pressure protection: Prevents the chlorine cylinder from being completely evacuated to prevent corrosion caused by moisture in the air Filter: To protect the valve from dirt particles from the chlorine cylinder or the connection area Cylinder pressure gauge: To display the pressure in the chlorine tank Simultaneous withdrawal: For largely uniform chlorine withdrawal from several chlorine cylinders in battery operation Flow limiter: To prevent cylinder icing due to excessive chlorine withdrawal Gas filter Compact design Available with all standard gas connections

The C 2214 is designed for individual operation. For use on gas drums, a heated droplet separator is optionally available on the pressure side in the inlet valve of the C 2214. A safety blow-off valve is integrated and prevents an impermissible increase in pressure in the downstream vacuum line system. The quantity of gas dosed can be optimally adjusted on the C 2214 using a dosing valve and flow meter. Features & advantages Throughput capacity with chlorine gas: up to 4 kg/h Residual pressure protection: Prevents the chlorine cylinder from being completely evacuated to prevent corrosion caused by moisture in the air Filter: To protect the valve from dirt particles from the chlorine cylinder or the connection area Cylinder pressure gauge: For displaying the pressure in the chlorine tank Integrated safety blow-off valve Flow meter with manual setting Gas filter Compact design Available with all standard gas connections

Flow-through chlorine electrolysis system TECHNOMAT PSFor water disinfection in private swimming pools The TECHNOMAT provides a medium-sized swimming pool with a high-quality and innovative method of disinfection using electrolysis. The TECHNOMAT disinfects the pool water without the use and storage of hazardous substances such as chlorine gas, chlorine bleach or chlorine tablets. The chlorine required for disinfection is obtained on site from ordinary NaCl salt (table salt, sea salt, sodium chloride) in the pool water - completely safe and with a pleasant side effect: salty water. Salt water has a revitalising effect, is kind to the skin and relaxing at the same time. It promises a quality of life that you can enjoy every day with the flow-through chlorine electrolysis systems from Technopool. The systems work according to the SALT-WATER-LIGHT® process, which has been tried and tested worldwide in private homes, hotel facilities, therapy and exercise pools as well as in municipal and commercial indoor and outdoor swimming pools. Features & advantages Compact design, installation in the smallest of spaces for pool volumes of max. 75 m³ Safety transformer with thermal fuse Primary and secondary protection through mains fuse and overload protection Insensitive to current fluctuations

Your versatile partner in measurement and control technologyWithits modular design, the multi-channel controller proves to be an adaptable and extremely competent companion for various measurement and control tasks. The modularity of the multi-channel controller makes it possible to record a wide range of measurement parameters such as chlorine, pH value, redox value or even quadruple pH value measurements in any conceivable combination,and the outputs are also freely selectable. Dosing pumps can be controlled via optocouplers or relays, as well as actuators via relays or a 20 mA output.The colour display with a very high resolution shows a user-friendly user interface. The user-friendliness is rounded off by simple touch operation and multilingual, intuitive menu navigation.Free digital outputs can be configured as required. Regardless of whether they are to switch in the event of low sample water, measured value overflow, measured value underflow or other possible alarm triggers: There are no limits to the configuration.You can use the four analogue outputs (0/4 - 20 mA) or the network capability to forward measured values to a web browser or a remote control station. An adjustable time interval can be used, for example, to automatically remind you to replace sensors due to wear and tear, anddata such as measured values, settings and alarm messages can be easily saved to a USB stick via a USB interface. Core functions of the multi-channel controller at a glance: Modular design of the inputs and outputs Up to four sensors and up to four additional temperature sensors Freely configurable overviews Differential value measurement (e.g. ∆pH) Graphic display of the setpoint deviation Up to four setpoint sets can be configured and loaded via digital input or timer control Service entries and sensor changes can be saved Limit value control (can be used as DIN contact for partial load operation in accordance with DIN 19643) 1 - 9 potential-free relay outputs Web server and Modbus protocol via Ethernet Trend display Large colour touch display Data storage on a USB stick