Skip to main content

Progressing cavity pump unit B70V SanitaryPlus

Product information "Progressing cavity pump unit B70V SanitaryPlus"

Description:

The B70V SanitaryPlus food pump is a powerful positive displacement pump for highly sensitive, viscous media with and without fibres or solids up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packs. The pump fulfils the requirements of hygienic design and is certified in accordance with the "3-A Sanitary Standards".

  • Also available in special immersion depths
  • Pumping unit equipped with Lutz Original handwheel
  • Examples of media: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products

Properties & advantages

  • Threadless, manually detachable quick connectors in the wetted area
  • Quick and easy disassembly
  • Quick and easy cleaning
  • Gentle, low-pulsation product conveyance
  • certified and approved in accordance with the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10"
Certification: 3-A Sanitary Standard
Connection: Tri-Clamp
Delivery head (up to max. bar)*: 8
Delivery rate (up to max. l/min)*: 50
Drive shaft (material): Stainless steel (1.4571)
Drive type: Compressed air, Electric
Explosion protection: No
Immersion depth (mm): 1100
Immersion tube diameter (max. mm): 54
Mechanical seal (material): SIC, carbon, EPDM
Pressure connection (DN): 50
Pumped liquid temperature (max °C): 100
Pumping unit material (material): Stainless steel (1.4404)
Rotor (material): Stainless steel (1.4571)
Seal type: mechanical seal (MS)
Static seal (material): EPDM
Stator (material): EPDM (ethylene propylene diene rubber)
Stator size: 50.1
Type: B70V-H-SR Sanitary Plus
Viscosity (up to max. mPas)*: 30000

* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Accessory Items

slide 9 to 13 of 10

Accessory Items

slide 1 to 2 of 2