Select a category
Our products
Our complete range of accessories
Filter pressure reducer
for Lutz air motors and diaphragm pumps DMP 1/4" to 2"
Description:
Filter pressure reducer with pressure gauge for setting the operating pressure.
Inlet pressure max. 16 bar
Ambient temperature max. 60°C
Features & advantages
Filter element 5 µm, Cellpor and 40 ?m, sintered bronze
Housing made of die-cast zinc and aluminium
Diaphragm and seals made of NBR
DN 19 (3/4")
Hose clamp DN 19 (3/4")
Description:
The hose clamp is made of stainless steel and is suitable for attaching delivery hoses to the pump outlet or accessories.
The nominal diameter of the clamp corresponds to DN19 (3/4")
Features & advantages
Clamping range from 28.0 - 31.0 mm
Explosion protection
Stainless steel
Foot strainer for progressing cavity pumps
for the progressive cavity pump B70V
Description:
The foot strainer can be used for progressive cavity pumps. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive.
For attaching to the pump base
Features & advantages
Prevents contamination in the pumping station by filtering it out
Material: Stainless steel (1.4571)
PP
DN 19 (3/4")
Hose connection
with 1 1/4" female thread connection
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
Suspension device
for pump Lutz B2 Vario
Description:
The suspension device is used to safely store the B2 Vario drum and laboratory pump. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the B2 Vario drum pump
Features & advantages
Increases the utility value
Protection against the pumping unit or drum pump falling down
Suspension device
for pumping stations with handwheel
Description:
The suspension device is used to store the drum pumps and prevents them from falling over.
For pumping stations with handwheel
Features & advantages
Protects against falling over
Increases the utility value
PP
Foot strainer for pumping stations Ø 41mm
Suitable for pumping station PP or suction pipe
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel pumping units. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Features & advantages
Prevents contamination in the pumping station by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
Barrel adapter
for drum pumps or pumping stations PP, PVDF, aluminium and stainless steel
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
Explosion protection
Dispensing nozzle Niro
For flammable and highly flammable liquids
Description:
For filling and transferring liquids in the food and pharmaceutical industries as well as flammable and highly flammable liquids. The body and valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal available on request at an extra charge
Connection: external thread G 1 1/4"
Features & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Carrying handle
for motor MA II and ME II
Description:
The support bracket makes it easier to lift the pump out of or immerse it in the drums or containers. With an explosion-protected drive motor, the explosion-protection switch is attached to the support bracket
for motor MA II / ME II / B4/GT / three-phase motor / single-phase motor / three-phase motor for reduction gearboxes
Features & advantages
No heavy lifting necessary
Makes it easier to lift out or immerse the motor either with or without pump unit
Dispensing nozzle PP
for acids and alkalis
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
Connection: external thread G 1 1/4"
Features & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
Stainless steel
IBC traverse
for drum pumps and eccentric screw pumps B70
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Relay module RM10
for the ST10, SL10, VA10, HC10, HDO 250, HDO 400, HDO 500 series
Description:
The relay module enables volume preselection with the corresponding connection cables.
Voltage: 220 - 230V
Features & benefits
Frequency: 50 - 60 Hz
Labelling: II (2) G [Ex ib Gb] IIC
PP
Barrel adapter PP
Suitable for pump types PP-DL with an immersion pipe diameter of 32 mm
Description:
The drum adapter stabilises the pumping unit or pump in the drum or container opening and prevents the pump from tipping over when the drum is empty.
Detailed information on the various container openings is available on request
for the B2 pumping unit
Features & advantages
Stabilisation of the drum pump
Protection against the pumping unit falling out
PE
PTFE
Pulsation damper
for the double diaphragm pumps 1/2"
Description:
The pulsation dampers are containers filled with a gas cushion. A diaphragm separates the gas cushion from the system fluid. Pulsation dampers store and discharge part of the stroke volume in the stroke rhythm of the double diaphragm pump, whereby the gas cushion is compressed or decompressed accordingly. This makes the pulsating flow rate of the pump almost uniform.
Automatic air control / adjustable air control (FPM version)
Materials: PE / PTFE / stainless steel
Features & advantages
Max. operating pressure 8 bar / 10 bar (FPM version)
ensure almost uniform volume flow, which increases the accuracy of flow meters
Compensation of pressure surges (water hammer) protects installed fittings
Prevents pipe vibrations that cause material fatigue and pipe breakages
Hose connection RE PP
with 1 1/4" female thread connection
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal diameter: DN 19 (3/4")
Material made of PP grey
NW 150mm
Container lid
Nominal diameter 150
Description:
The container lid is used to hold a drum adapter and is suitable for the IBC container
Nominal width of 150 and 225
Properties & advantages
Material: PE
Thread: 2" IG
PP
Barrel adapter
for the eccentric worm-drive pump B70V
Description:
The drum adapter is required to secure the pump in the drum opening. It prevents the pump from tipping over when the drum is empty.
Features & advantages
Material made of PP / St 37
Explosion protection
Wechselstrom
CEAG
Ex-plug
for ME II motor and for B70V-SR (Ex)
Description:
The CEE round plugs are suitable for three-phase motors (three-phase current) and electric motors (alternating current) and are used in potentially explosive areas or environments.
Splash-proof
Features & benefits
Certification: EEx de IIC T6
Protection class: IP 65
Rotary (3-pole) or alternating current (5-pole)
Explosion protection
Stainless steel
1 1/4" - 1 1/4" IG
Barrel pump connection
made of stainless steel for VA 10 Ex flow meters
Description:
The drum pump connection is required to connect a VA 10 flow meter to a drum and container pump.
Material stainless steel
Features & advantages
Connection: 1 1/4" female thread - 1 1/4" female thread to 1 1/4" male thread
Seals: PTFE
Explosion protection
Brass petrol nozzle
for solvents and highly flammable hydrocarbons
Description:
For dispensing and transferring solvents and neutral liquids. The housing and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The dispensing nozzle is sealed with a PTFE seal.
Connection: external thread G 1 1/4"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel coupling ensures tightness at high pressure
For pumping in potentially explosive environments
Your contact person
Lutz-Jesco GmbH | Austria
Have a question about our products?
Our team is happy to help. Please send us an enquiry or give us a call.
+43 2256 62 180
info@lutz-jesco.at
