Pump set - Explosive media
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The pump set is suitable for low-viscosity, flammable and highly flammable liquids and is perfect for dispensing or transferring explosive media.
- Optionally available with Ex plug
- Pumping unit equipped with Lutz original handwheel
- Suitable for filling or transferring alternative fuels, oils and flammable liquids
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Highly resistant high-grade carbon shaft bearing
- Maintenance without special tools
- Sealing modules of the sealless (DL) pump can be replaced
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
| Bearing (material): | Edelkohle |
|---|---|
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 14 |
| Delivery rate (up to max. l/min)*: | 95 |
| Delivery rate with nozzle (up to max. l/min)*: | 50 |
| Density (up to kg/dm³): | 1.6 |
| Design/equipment: | with undervoltage release |
| Drive shaft (material): | Stainless steel (1.4571) |
| Drive type: | Electric |
| Explosion protection: | Yes |
| Frequency (Hz): | 50 |
| Hose length (mm): | 2000 |
| Immersion depth (mm): | from 1000 mm |
| Immersion tube diameter (max. mm): | 41 |
| Mechanical seal (material): | no seals in contact with the medium |
| Operating pressure (max. bar): | lower than 6 bar |
| Power (W): | 460 |
| Protection class: | IP54 |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Suitable media: | Acetone, Butyl acetate, Essigsäure, Ethyl acetate, Formic acid, Nikotin, Styrene, Toluene |
| Thread (inch) external: | 1 1/4" |
| Viscosity (up to max. mPas)*: | 350 |
| Voltage (V): | 230 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
