Pump set - B2 Vario PP
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The B2 Vario pump set is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for dispensing small containers such as canisters, hobbocks and drums. The pump is flexible at all times and thus conserves important resources.
- Infinitely variable speed controller for transferring and filling small quantities
Features & advantages
- Sealless design (DL) conditionally dry-running safe
- Infinitely variable
- Powerful motor with improved service life
- Service-friendly and easy to dismantle
| Bearing (material): | ETFE / PTFE |
|---|---|
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 7 |
| Delivery rate (up to max. l/min)*: | 75 |
| Delivery rate with nozzle (up to max. l/min)*: | 22 |
| Density (up to kg/dm³): | 1.3 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Drive type: | Electric |
| Frequency (Hz): | 50 |
| Hose length (mm): | 1500 |
| Immersion depth (mm): | up to 500 mm |
| Immersion tube diameter (max. mm): | 32 |
| Mechanical seal (material): | no seals in contact with the medium |
| Power (W): | 200 |
| Protection class: | IP24 |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | PP (polypropylene) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Suitable media: | Akkusäure, Ammoniakwasser, Fotofixierer, Glycol, Hydrogen peroxide, Phosphoric acid, Photo developer, Salzsäure |
| Thread (inch) external: | 1" |
| Viscosity (up to max. mPas)*: | 300 |
| Voltage (V): | 230 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
