Niro pumping station - PURE
*Illustration may differ from the actual product
Description:
The Lutz pumping station (Niro) PURE is suitable for aqueous and fatty foods. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz Original handwheel
- Also for food containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents
Features & advantages
- physiologically safe design
- High surface quality
- Food-safe connections
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Approved according to FDA and Regulation (EC) 1935/2004
| Bearing (material): | Edelkohle |
|---|---|
| Certification: | FDA-compliant, Verordnung (EG) 1935/2004 |
| Connection: | Tri-Clamp |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 26 |
| Delivery rate (up to max. l/min)*: | 124 |
| Density (up to kg/dm³): | 1.9 |
| Drive shaft (material): | Stainless steel (1.4571) |
| Explosion protection: | No |
| Immersion depth (mm): | from 500 mm |
| Immersion tube diameter (max. mm): | 41 |
| Mechanical seal (material): | no seals in contact with the medium |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Tri-Clamp connection (DN): | 32 |
| Type: | Niro 41-R-DL |
| Viscosity (up to max. mPas)*: | 750 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Accessory Items