Flow meter TS type SL10
Swash plate
Battery
*Illustration may differ from the actual product
Product number:
0231-010
Product information "Flow meter TS type SL10"
Description:
The first flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures oils, aggressive media such as acids and alkalis precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with a quantity preselector (relay module) so that the pump or system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
- Optionally with quantity preselection (relay module)
- Examples of media: Hydrochloric acid, nitric acid, etc.
- Mobile on a drum pump or with dispensing nozzle connection or stationary in plant construction
Features & advantages
- Measurement according to the wobble disc principle
- High measuring accuracy
- Variable display orientation
- Touchscreen display with self-explanatory, multilingual user interface
- Measuring range from 10 l/min- 100 l/min
- simple operation
| Connection: | Gewinde |
|---|---|
| Design/equipment: | ohne Mengenvorwahl |
| Housing (material): | PPO (polyphenylene ether) |
| Inlet connection (inch): | 2" |
| Magnet (material): | PPS (polyphenylene sulphide) encapsulated |
| Measuring accuracy calibrated**: | ± 1% |
| Measuring chamber (material): | PPO (polyphenylene ether), PPS (polyphenylene sulphide) |
| Measuring principle: | Swash plate |
| Measuring range (up to max. l/min): | 100 |
| Operating pressure (max. bar): | 4 |
| Outlet connection (inch): | 1 1/4" |
| Protection class: | IP55 |
| Pumped liquid temperature (max °C): | 60 |
| Seals (material): | FPM (fluorinated rubber) |
| Suitable media: | Nitric acid, Salzsäure |
| Type: | SL10 |
| Viscosity (up to max. mPas)*: | 2000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Swash plate
Battery
Flow meter TS type ST10
For acids, alkalis and aggressive media
Description:
The first flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures low-viscosity to medium-viscosity media such as water and mineral oils precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with a quantity preselector (relay module) so that the pump or system switches off automatically after the selected quantity has been measured. This further simplifies and secures the operation of the systems.
Optionally with volume preselection (relay module)
Examples of media: water, oil, diesel, heating oil, hydraulic oils, etc.
Mobile on a drum pump or with nozzle connection or stationary in plant construction
Features & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display orientation
Touchscreen display with self-explanatory, multilingual user interface
Measuring range from 10 l/min- 100 l/min
simple operation
Swash plate
Battery
Flow meter TS type VA10
For acids, alkalis and aggressive media
Description:
The first flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures acids and alkalis, almost all solvents and highly flammable liquids precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the pump or system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optionally with quantity preselection (relay module)
Examples of media: hydrochloric acid, nitric acid, styrene, petrol, acetone, etc.
Mobile on a drum pump or with dispensing nozzle connection or stationary in plant construction
Features & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display orientation
Touchscreen display with self-explanatory, multilingual user interface
Measuring range from 10 l/min- 100 l/min
simple operation
Accessory Items
Swash plate
Battery
Relay module RM30
For acids, alkalis and aggressive media
Description:
The relay module enables volume preselection with the corresponding connection cables. It is required to control three-phase motors.
Voltage: 230 V or 400 V
Features & advantages
Power: 0.8 kW or 1.5 kW
Frequency: 50 Hz
Labelling: II (2) G [Ex ib Gb] IIC
Swash plate
Battery
Communication module KM10K (complete version)
For acids, alkalis and aggressive media
Description:
The communication module enables communication with other control units.
Cable glands are integrated
Features & benefits
Analogue output (0-20mA, 4-20mA, 0-10V)
Pulse and alarm output
RS485 interface
Swash plate
Battery
Non-return valve
For acids, alkalis and aggressive media
Description:
The non-return valve prevents the liquid from flowing back into the full hose system.
Material: PTFE
Properties & advantages
Seals: FPM / FPM-FEP
Opening pressure: 0.05 bar
Swash plate
Battery
Connection cable motor/slow 1-fold
For acids, alkalis and aggressive media
Description:
The connection cable is used for direct connection between the RM10 relay module and the respective motor.
Special lengths are available on request
Features & advantages
Cable length: 0.5 m
Voltage: 230 V
Frequency: 50 Hz
Swash plate
Battery
Solenoid valve
For acids, alkalis and aggressive media
Description:
The 2/2-way solenoid valve seals off the air supply to the double diaphragm pump. It can be controlled via the relay module.
Material: Brass / stainless steel / PVC
The Ex versions include the mini CLIX®/eXLink® plug and a 5 m connection cable
Features & advantages
Seal: FPM / PTFE (Ex version)
Connection type: 3/4 "IG
Voltage: 230 V
Frequency: 50 Hz
Swash plate
Battery
Barrel pump connection
For acids, alkalis and aggressive media
Description:
The drum pump connection is required to connect the ST 10 / SL10 flow meters to a drum and container pump. To connect the LM10 / UN 10 flow meter to a drum pump, the connection with the conductive drum pump connection in the PPS version is required.
Materials PPO / PPS
Features & advantages
Connection: 1 1/4" female thread to 2" male thread
Seals: FPM and FPM - FEP
Swash plate
Battery
Mains connection cable
For acids, alkalis and aggressive media
Description:
The mains connection cable is used to connect the RM10 relay module / NG10 power supply unit and the Safety Box.
Special lengths are available on request
Features & advantages
Cable length: 5 m
Voltage: 230 V
Frequency: 50 Hz
Swash plate
Battery
Main valve connection cable
For acids, alkalis and aggressive media
Description:
The connection cable is used for direct connection between the RM10 / RM30 relay module and the main valve.
Special lengths are available on request
Features & advantages
Cable length: 5 m
Voltage: 230 V
Frequency: 50 Hz
Swash plate
Battery
Relay module RM10
For acids, alkalis and aggressive media
Description:
The relay module enables volume preselection with the corresponding connection cables.
Voltage: 220 - 230V
Features & benefits
Frequency: 50 - 60 Hz
Labelling: II (2) G [Ex ib Gb] IIC
Swash plate
Battery
NG10 power supply unit
For acids, alkalis and aggressive media
Description:
The power supply unit supplies power to the operating unit. When using a relay module, no additional power supply unit is required as the module includes the power supply function.
Voltage: 220 - 230 V
Features & benefits
Frequency: 50 - 60 Hz
Labelling: II (2) G [Ex ib Gb] IIC