Double diaphragm pump DMP model 3/8" plastic
Plastic
PVDF
Compressed air
*Illustration may differ from the actual product
Product number:
5211-010
Product information "Double diaphragm pump DMP model 3/8" plastic"
Description:
The double diaphragm pump is suitable for pumping small quantities, in laboratories and for occasional filling operations
- Typical applications: Chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
- integrated silencer up to model size DMP 1"
- highly resistant TFM (PTFE) diaphragms (modified PTFE)
Features & advantages
- High hydraulic performance
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Reinforced elastomers and thermoplastic diaphragm
- Absolutely oil-free
- blockage-free operation
| Air inlet ( Ø mm): | 6 |
|---|---|
| Air pressure (max. bar): | 8 |
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene carbon fibre reinforced (PP) |
| Connection: | Gewinde |
| Delivery head (up to max. mWS)*: | 80 |
| Delivery rate (up to max. l/min)*: | 26 |
| Displacement per chamber (in cm³): | 35 |
| Displacement per cycle (in cm³): | 70 |
| Double diaphragm pumps (material): | non - metallic |
| Explosion protection: | No |
| Housing (material): | Polyvinylidene fluoride carbon fibre reinforced (PVDF) |
| Membranes (material): | TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP-Compound + Modifiziertes Polytetrafluorethylen) |
| Pressure connection (inch) inside: | 3/8" |
| Pumped liquid temperature (max °C): | 90 |
| Seals (material): | PTFE (polyvinylidene fluoride) |
| Size (inch): | 3/8" |
| Solids (max. ø mm): | 3 |
| Sound pressure level ( in dB(A)): | 72 |
| Suction height dry (up to max. mWS*): | 4 |
| Suction nozzle (inch) inside: | 3/8" |
| Type: | DMP 3/8" KNT PVDF/PTFE |
| Valve ball (material): | PTFE (polytetrafluoroethylene) |
| Valve seat (material): | PVDF (polyvinylidene fluoride) |
| Viscosity (up to max. mPas)*: | 3500 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Plastic
PVDF
Compressed air
Screw-in fitting
for small systems and in laboratories
Description:
The screw-in fitting enables the direct connection of hoses to the pressure or suction connection of the double diaphragm pump.
Materials PP / PVDF
Features & advantages
Connection type: DN 8 x 1/4" AG / DN 8 x 3/8" AG
Plastic
PVDF
Compressed air
Potential equalisation cable
for small systems and in laboratories
Description:
The potential equalisation cable is used for the electrically conductive connection between the explosion-protected pump and the container and has the function of earthing and potential equalisation.
2 m with fastening clip
Features & advantages
Earthing and potential equalisation function
Plastic
PVDF
Compressed air
IBC traverse
for small systems and in laboratories
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Plastic
PVDF
Compressed air
Air connection set
for small systems and in laboratories
Description:
Air connection set with adapter for coupling (NW 7.2) or compressed air hose with an internal diameter of 9 mm
Accessory Items
Plastic
PVDF
Compressed air
Double diaphragm pump DMP model 1/2" plastic
for small systems and in laboratories
Description:
The double diaphragm pump is suitable for industrial applications as well as for drum, IBC and tank emptying.
Typical applications: 200 litre drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap
Integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Features & benefits
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Plastic
PVDF
Compressed air
Double diaphragm pump DMP model 1/4" plastic
for small systems and in laboratories
Description:
The double diaphragm pump is suitable for pumping small quantities, in laboratories and for occasional filling operations
typical applications: chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Features & advantages
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Plastic
PVDF
Compressed air
Double diaphragm pump DMP model 3/8" plastic
for small systems and in laboratories
Description:
The double diaphragm pump is suitable for pumping small quantities, in laboratories and for occasional filling operations
typical applications: chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
integrated silencer up to model size DMP 1"
Features & advantages
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation