Double diaphragm pump DMP model 2" PEE PURE
Food
Plastic
PE
*Illustration may differ from the actual product
Product number:
5258-030
Product information "Double diaphragm pump DMP model 2" PEE PURE"
Description:
The double diaphragm pump is suitable for the food and pharmaceutical sectors as well as for large flow rates and higher viscosities.
- typical applications: liquid food and luxury foods, active pharmaceutical ingredients and cosmetic products
- Highly resistant PE material with low coefficient of friction
- FDA-compliant
Features & benefits
- High hydraulic performance
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Ice-free air system
- Blockage-free operation
- Food-safe connections
| Air inlet (inch) inside: | 3/4" |
|---|---|
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene glass fibre reinforced (PP) |
| Connection: | Flange |
| Delivery head (up to max. mWS)*: | 80 |
| Delivery rate (up to max. l/min)*: | 715 |
| Displacement per chamber (in cm³): | 1910 |
| Displacement per cycle (in cm³): | 3820 |
| Double diaphragm pumps (material): | non - metallic |
| Housing (material): | PE (polyethylene) |
| Membranes (material): | PTFE (polyvinylidene fluoride) |
| Pressure connection (DN): | 50 |
| Pumped liquid temperature (max °C): | 60 |
| Seals (material): | EPDM (ethylene-propylene-diene monomer) |
| Size (inch): | 2" |
| Solids (max. ø mm): | 9 |
| Suction nozzle (DN) : | 50 |
| Type: | DMP 2" PEE PURE PE/EPDM |
| Valve ball (material): | PTFE (polytetrafluoroethylene) |
| Valve seat (material): | PE (polyethylene) |
| Viscosity (up to max. mPas)*: | 30000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Food
Plastic
PE
IBC traverse
for the food and pharmaceutical sectors
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Accessory Items
Food
Plastic
PE
Double diaphragm pump DMP model 1 1/2" metal
for the food and pharmaceutical sectors
Description:
The double diaphragm pump is suitable for large-scale industry and system feeding as well as for large flow rates and higher viscosities.
Typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals
Integrated silencer up to model size DMP 1"
also available in the Pure version (5244-410)
Features & benefits
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Absolutely oil-free
Blockage-free operation
Pumps explosion-proof in accordance with the ATEX directive (explosion protection)
Food
Plastic
PE
Double diaphragm pump DMP model 1 1/2" plastic
for the food and pharmaceutical sectors
Description:
The double diaphragm pump is suitable for large-scale industry and system feeding as well as for large flow rates and higher viscosities.
Typical applications: Filter press, tank cleaning system, pigment dyes and resins
Integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Features & benefits
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Food
Plastic
PE
Double diaphragm pump DMP model 1 1/2" PURE
for the food and pharmaceutical sectors
Description:
The double diaphragm pump is suitable for the food and pharmaceutical sectors as well as for large flow rates and higher viscosities.
Typical applications: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products
Integrated silencer up to model size DMP 1"
FDA-compliant
Features & benefits
High hydraulic performance and optimised air consumption
Highly resistant TFM (PTFE) diaphragms (modified PTFE)
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Ideal for shear-sensitive media
Food-safe connections
Food
Plastic
PE
Double diaphragm pump DMP model 2" metal
for the food and pharmaceutical sectors
Description:
The double diaphragm pump is suitable for large-scale industry and system feeding as well as for large flow rates and higher viscosities.
Typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals
Integrated silencer up to model size DMP 1"
also available in the Pure version (5254-410)
Features & benefits
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Absolutely oil-free
Blockage-free operation
Pumps explosion-proof in accordance with the ATEX directive (explosion protection)
Food
Plastic
PE
Double diaphragm pump DMP model 2" plastic
for the food and pharmaceutical sectors
Description:
The double diaphragm pump is suitable for large-scale industry and system feeding as well as for large flow rates and higher viscosities.
Typical applications: Filter press, tank cleaning system, pigment dyes and resins
Integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Features & benefits
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation