Available, delivery time: 2-5 days
Description:
The double diaphragm pump is suitable for the food and pharmaceutical sectors as well as for emptying drums, IBCs and tanks.
- Typical applications: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products
- Integrated silencer up to model size DMP 1"
- FDA-compliant
Features & benefits
- High hydraulic performance
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Ice-free air system
- Blockage-free operation
- Food-safe connections
Air inlet (inch) inside: | 1/4" |
---|---|
Air pressure (max. bar): | 8 |
Air pressure start-up (min. bar): | 2 |
Centre block (material): | Polypropylene glass fibre reinforced (PP) |
Certification: | FDA-compliant |
Connection: | Tri-Clamp |
Delivery head (up to max. mWS)*: | 80 |
Delivery rate (up to max. l/min)*: | 76 |
Displacement per chamber (in cm³): | 75 |
Displacement per cycle (in cm³): | 150 |
Double diaphragm pumps (material): | Metal |
Housing (material): | Stainless steel 1.4404 (316 L) electropolished |
Membranes (material): | TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP-Compound + Modifiziertes Polytetrafluorethylen) |
Pressure connection (inch) inside: | Tri-Clamp 1 |
Pumped liquid temperature (max °C): | 100 |
Seals (material): | PTFE (polyvinylidene fluoride) |
Size (inch): | 1/2" |
Solids (max. ø mm): | 3,8 |
Sound pressure level ( in dB(A)): | 75 |
Suction height dry (up to max. mWS*): | 4 |
Suction nozzle (inch) inside: | Tri-Clamp 1 |
Type: | DMP 1/2" SST PURE SS/PTFE |
Valve ball (material): | PTFE (polytetrafluoroethylene) |
Valve seat (material): | Stainless steel |
Viscosity (up to max. mPas)*: | 7500 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter