Double diaphragm pump DMP model 1/2" plastic
Plastic
PP
Compressed air
*Illustration may differ from the actual product
Product number:
5220-050
Product information "Double diaphragm pump DMP model 1/2" plastic"
Description:
The double diaphragm pump is suitable for industrial applications as well as for drum, IBC and tank emptying.
- Typical applications: 200 litre drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap
- Integrated silencer up to model size DMP 1"
- highly resistant TFM (PTFE) diaphragms (modified PTFE)
Features & benefits
- High hydraulic performance
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Reinforced elastomers and thermoplastic diaphragm
- Absolutely oil-free
- blockage-free operation
| Air inlet (inch) inside: | 1/4" |
|---|---|
| Air pressure (max. bar): | 8 |
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene carbon fibre reinforced (PP) |
| Connection: | Gewinde |
| Delivery head (up to max. mWS)*: | 80 |
| Delivery rate (up to max. l/min)*: | 76 |
| Displacement per chamber (in cm³): | 75 |
| Displacement per cycle (in cm³): | 150 |
| Double diaphragm pumps (material): | non - metallic |
| Explosion protection: | No |
| Housing (material): | Polypropylene glass fibre reinforced (PP) |
| Membranes (material): | FPM (fluorinated rubber) |
| Pressure connection (inch) inside: | 1/2" |
| Pumped liquid temperature (max °C): | 60 |
| Seals (material): | FPM (fluorinated rubber) |
| Size (inch): | 1/2" |
| Solids (max. ø mm): | 3,2 |
| Sound pressure level ( in dB(A)): | 75 |
| Suction height dry (up to max. mWS*): | 4 |
| Suction nozzle (inch) inside: | 1/2" |
| Type: | DMP 1/2" PPV PP/FPM |
| Valve ball (material): | FPM (fluorinated rubber) |
| Valve seat (material): | PP (polypropylene) |
| Viscosity (up to max. mPas)*: | 7500 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Plastic
PP
Compressed air
Screw-in hose nozzle
for drum, IBC and tank emptying
Description:
The screw-in hose nozzle enables the direct connection of hoses to the pressure or suction nozzle of the double diaphragm pump.
Material PP
Features & advantages
Connection type: DN 12 x 1/2" AG / DN 20 x 1/2" AG
Plastic
PP
Compressed air
Vibration damper set
for drum, IBC and tank emptying
Description:
The vibration damper set ensures the damping of vibrations, shocks and impacts. The set consists of 4 vibration dampers including fastening material.
Thread M6 / M8 / M 12
Features & advantages
M6 / M8 / M 12 thread standard in accordance with DIN 13-1
Plastic
PP
Compressed air
Potential equalisation cable
for drum, IBC and tank emptying
Description:
The potential equalisation cable is used for the electrically conductive connection between the explosion-protected pump and the container and has the function of earthing and potential equalisation.
2 m with fastening clip
Features & advantages
Earthing and potential equalisation function
Plastic
PP
Compressed air
Hose connection
for drum, IBC and tank emptying
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
Plastic
PP
Compressed air
Suction pipe
for drum, IBC and tank emptying
Description:
The suction tube is required to be able to convey or suck in highly chemical media without the outer layer being attacked as when immersing a hose.
Material: PP
Features & advantages
Outer tube diameter 41 mm
Tube length from 1000 - 1200 mm
Connection: 1 1/4" AG
Plastic
PP
Compressed air
Vibration damper set
for drum, IBC and tank emptying
Description:
The vibration damper set ensures the damping of vibrations, shocks and impacts. The set consists of 4 vibration dampers including fastening material.
M6 / M8 thread
Features & advantages
M6 / M8 thread standard in accordance with DIN 13-1
Plastic
PP
Compressed air
Pulsation damper
for drum, IBC and tank emptying
Description:
The pulsation dampers are containers filled with a gas cushion. A diaphragm separates the gas cushion from the system fluid. Pulsation dampers store and discharge part of the stroke volume in the stroke rhythm of the double diaphragm pump, whereby the gas cushion is compressed or decompressed accordingly. This makes the pulsating flow rate of the pump almost uniform.
Automatic air control / adjustable air control (FPM version)
Materials: PE / PTFE / stainless steel
Features & advantages
Max. operating pressure 8 bar / 10 bar (FPM version)
ensure almost uniform volume flow, which increases the accuracy of flow meters
Compensation of pressure surges (water hammer) protects installed fittings
Prevents pipe vibrations that cause material fatigue and pipe breakages
Plastic
PP
Compressed air
IBC traverse
for drum, IBC and tank emptying
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Accessory Items
Plastic
PP
Compressed air
Double diaphragm pump DMP model 1/2" PURE
for drum, IBC and tank emptying
Description:
The double diaphragm pump is suitable for the food and pharmaceutical sectors as well as for emptying drums, IBCs and tanks.
Typical applications: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products
Integrated silencer up to model size DMP 1"
FDA-compliant
Features & benefits
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Ice-free air system
Blockage-free operation
Food-safe connections
Plastic
PP
Compressed air
Double diaphragm pump DMP model 1/2" metal
for drum, IBC and tank emptying
Description:
The double diaphragm pump is suitable for industrial applications as well as for drum, IBC and tank emptying.
Typical applications: 200 litre drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap
Integrated silencer up to model size DMP 1"
also available in the Pure version (5224-410)
Features & benefits
High hydraulic performance
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Absolutely oil-free
Blockage-free operation
Pumps explosion-proof in accordance with the ATEX directive (explosion protection)