Dispensing nozzle PP
*Illustration may differ from the actual product
Product number:
0204-380
Product information "Dispensing nozzle PP"
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
- Connection: external thread G 1 1/4"
Features & advantages
- Simple adjustment of the volume flow
- Safe filling or decanting of the respective liquid
- Easy to operate
| Accessories group: | Nozzles |
|---|---|
| Delivery rate (up to max. l/min)*: | 50 |
| Housing (material): | PP (polypropylene) |
| Operating pressure (max. bar): | 3 |
| Product group: | Drum pumps / container pumps |
| Pumped liquid temperature (max °C): | 50 |
| Static seal (material): | FPM (fluororubber) |
| Thread (inch) external: | 1 1/4" |
| Type: | Dispensing nozzle PP |
| Viscosity (up to max. mPas)*: | 760 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Brass petrol nozzle
for acids and alkalis
Description:
For dispensing and transferring solvents and neutral liquids. The housing and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The dispensing nozzle is sealed with a PTFE seal.
Connection: external thread G 1 1/4"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel coupling ensures tightness at high pressure
For pumping in potentially explosive environments
Dispensing nozzle PVDF
for acids and alkalis
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12mm). The dispensing nozzle is sealed with an FPM seal.
FFPM or FEP / FPM seals are available at extra cost on request
Connection: external thread G 1 1/4"
Optionally available as a variant with a push-button for direct operation of the relay module (no communication module required)
Features & benefits
Simple adjustment of the volume flow
Easy to operate
Safe filling and Decanting the respective liquid
Dispensing nozzle Niro in PURE design
for acids and alkalis
Description:
For filling and transferring liquids in the food and pharmaceutical industries as well as flammable and highly flammable liquids. The body and valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
Connection: Tri-Clamp DN32
Features & benefits
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Automatic nozzle aluminium
for acids and alkalis
Description:
For filling and transferring flammable and highly flammable liquids. The dispensing nozzle housing is made of aluminium and the internal parts are made of brass or POM material. The dispensing nozzle is equipped with an automatic shut-off device with a ball-tilt safety trigger and is sealed with a PTFE seal.
Connection: external thread G 1"
Swivelling hose connection possible
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Automatic switch-off
for pumping in potentially explosive environments
Dispensing nozzle Niro
for acids and alkalis
Description:
For filling and transferring liquids in the food and pharmaceutical industries as well as flammable and highly flammable liquids. The body and valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal available on request at an extra charge
Connection: external thread G 1 1/4"
Features & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Aluminium nozzle
for acids and alkalis
Description:
For transferring and filling mineral oils, heating oil and diesel. The dispensing nozzle housing and valve plug are made of aluminium and are equipped with a swivel joint and a protective bracket.The dispensing nozzle is sealed using an NBR seal.
Connection: Female thread G 1"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure