Dispensing nozzle Niro in PURE design
Food
Explosion protection
Seal FPM
*Illustration may differ from the actual product
Product number:
0206-802
Product information "Dispensing nozzle Niro in PURE design"
Description:
For filling and transferring liquids in the food and pharmaceutical industries as well as flammable and highly flammable liquids. The body and valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
- Connection: Tri-Clamp DN32
Features & benefits
- For pumping in potentially explosive environments
- Simple adjustment of the volume flow
- Easy to operate
- Safe filling or transferring of the respective liquid
- Rotary coupling ensures tightness at high pressure
| Accessories group: | Nozzles |
|---|---|
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004 |
| Delivery rate (up to max. l/min)*: | 50 |
| Explosion protection: | Yes |
| Housing (material): | Stainless Steel |
| Operating pressure (max. bar): | 3 |
| Product group: | Drum pumps / container pumps |
| Pumped liquid temperature (max °C): | 80 |
| Static seal (material): | FEP / FPM, FPM (fluororubber) |
| Thread (inch) external: | Tri-Clamp |
| Type: | Zapfpistole Niro |
| Viscosity (up to max. mPas)*: | 760 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Food
Explosion protection
Seal FPM
Automatic nozzle aluminium
For flammable and highly flammable liquids
Description:
For filling and transferring flammable and highly flammable liquids. The dispensing nozzle housing is made of aluminium and the internal parts are made of brass or POM material. The dispensing nozzle is equipped with an automatic shut-off device with a ball-tilt safety trigger and is sealed with a PTFE seal.
Connection: external thread G 1"
Swivelling hose connection possible
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Automatic switch-off
for pumping in potentially explosive environments
Food
Explosion protection
Seal FPM
Dispensing nozzle PVDF
For flammable and highly flammable liquids
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12mm). The dispensing nozzle is sealed with an FPM seal.
FFPM or FEP / FPM seals are available at extra cost on request
Connection: external thread G 1 1/4"
Optionally available as a variant with a push-button for direct operation of the relay module (no communication module required)
Features & benefits
Simple adjustment of the volume flow
Easy to operate
Safe filling and Decanting the respective liquid
Food
Explosion protection
Seal FPM
Brass petrol nozzle
For flammable and highly flammable liquids
Description:
For dispensing and transferring solvents and neutral liquids. The housing and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The dispensing nozzle is sealed with a PTFE seal.
Connection: external thread G 1 1/4"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel coupling ensures tightness at high pressure
For pumping in potentially explosive environments
Food
Explosion protection
Seal FPM
Dispensing nozzle PP
For flammable and highly flammable liquids
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
Connection: external thread G 1 1/4"
Features & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
Food
Explosion protection
Seal FPM
Aluminium nozzle
For flammable and highly flammable liquids
Description:
For transferring and filling mineral oils, heating oil and diesel. The dispensing nozzle housing and valve plug are made of aluminium and are equipped with a swivel joint and a protective bracket.The dispensing nozzle is sealed using an NBR seal.
Connection: Female thread G 1"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure