Barrel pump - Mineral oils
Electric
Barrel pump
*Illustration may differ from the actual product
Available, delivery time: 2-5 days
Product number:
0205-305
Product information "Barrel pump - Mineral oils"
Description:
The drum pump is suitable for low-viscosity, aggressive and non-flammable media. Perfectly suited for the removal or decanting of mineral oils.
- Examples of media: Diesel, heating oil, hydraulic oil, machine oil and engine oil etc.
- Pumping unit equipped with Lutz Original handwheel
- Suitable for filling or decanting alternative fuels
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Optimised drum emptying
- Universally resistant ETFE shaft bearing
- Maintenance without special tools
- Sealing modules of the sealless (DL) pump can be replaced
| Bearing (material): | ETFE |
|---|---|
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 19 |
| Delivery rate (up to max. l/min)*: | 87 |
| Density (up to kg/dm³): | 1.4 |
| Design/equipment: | Comfort grip |
| Drive shaft (material): | Stainless steel (1.4571) |
| Drive type: | Electric |
| Frequency (Hz): | 50 |
| Immersion depth (mm): | from 1000 mm |
| Immersion tube diameter (max. mm): | 41 |
| Mechanical seal (material): | no seals in contact with the medium |
| Operating pressure (max. bar): | lower than 6 bar |
| Power (W): | 500 |
| Protection class: | IP24 |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Alu (Aluminium) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Suitable media: | Diesel (, Engine oil, Heizöl, Hydraulic oil, Maschinenöl |
| Thread (inch) external: | 1 1/4" |
| Viscosity (up to max. mPas)*: | 500 |
| Voltage (V): | 230 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Similar Items
Electric
Barrel pump
Drum pump battery - Mineral oils
for oils and cooling lubricants
Description:
The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for extracting or transferring mineral oils.
Examples of media: Diesel, heating oil, hydraulic oil, machine oil and engine oil etc.
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting alternative fuels
Features & advantages
Wear-free, particularly low-noise BLDC motor
Optimised drum emptying
Infinitely variable
Extremely high performance with low weight
Maintenance without special tools
Sealing modules of the sealless (DL) pump can be replaced
Long service life
Accessory Items
Electric
Barrel pump
Barrel adapter
for oils and cooling lubricants
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
Electric
Barrel pump
Container lid
for oils and cooling lubricants
Description:
The container lid is used to hold a drum adapter and is suitable for the IBC container
Nominal width of 150 and 225
Properties & advantages
Material: PE
Thread: 2" IG
Electric
Barrel pump
Aluminium nozzle
for oils and cooling lubricants
Description:
For transferring and filling mineral oils, heating oil and diesel. The dispensing nozzle housing and valve plug are made of aluminium and are equipped with a swivel joint and a protective bracket.The dispensing nozzle is sealed using an NBR seal.
Connection: Female thread G 1"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure
Electric
Barrel pump
Mineral oil hose set
for oils and cooling lubricants
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose set is made of PVC with an embedded and galvanised steel wire helix. The set is used for connection to the pumping station or the dispensing nozzle.
Also available in special lengths on request
Features & advantages
Nominal diameter DN 25 (1")
Aluminium hose connection
Pre-assembled hose connections and hose clamps
Electric
Barrel pump
Foot strainer
for oils and cooling lubricants
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel pumping units. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Features & advantages
Prevents contamination in the pumping station by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
Electric
Barrel pump
Suspension device
for oils and cooling lubricants
Description:
The suspension device is used to store the drum pumps and prevents them from falling over.
For pumping stations with handwheel
Features & advantages
Protects against falling over
Increases the utility value
Electric
Barrel pump
IBC traverse
for oils and cooling lubricants
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Electric
Barrel pump
Flow meter MDO 2
for oils and cooling lubricants
Description:
The flow meter with display impresses with its simple, needs-based display, ease of use and compact design. Thanks to the rotating oval wheel meter and a magnet integrated in the measuring chamber, it enables accurate measurement of the volume flow and measures mineral oils and alternative fuels precisely, quickly and, above all, efficiently.
Suitable for measuring alternative fuels
Features & advantages
Measurement according to the oval gear principle
High measuring accuracy
Low pressure losses in the system
Measuring range from 3 l/min - 80 l/min
Low frictional resistance