Skip to main content

Battery pump set - B2 Battery PVDF

Product information "Battery pump set - B2 Battery PVDF"

Description:

The B2 Battery pump set is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources.

  • Replaceable, powerful rechargeable battery with Li-Ion
  • Battery life 35 min at maximum speed
  • 1 battery charge empties approx. 12 x 200 litre containers

Features & benefits

  • BLDC motor with high efficiency of up to 70%
  • Infinitely variable
  • Long battery life
  • Automatic switch-off in case of overload
  • Sophisticated quick-release fastener
Bearing (material): ETFE / PTFE
Capacity (Ah): 4
Conveyor wheel (material): ETFE (ethylene-tetrafluorethylene copolymer)
Conveyor wheel shape / drive type: Axial-flow rotor
Delivery head (up to max. mWS)*: 8
Delivery rate (up to max. l/min)*: 80
Delivery rate with nozzle (up to max. l/min)*: 45
Density (up to kg/dm³): 1.6
Drive shaft (material): Hastelloy C (2.4610)
Drive type: Battery
Hose length (mm): 1500
Immersion depth (mm): up to 500 mm
Immersion tube diameter (max. mm): 32
Mechanical seal (material): no seals in contact with the medium
Power (W): 260
Pumped liquid temperature (max °C): 90
Pumping unit material (material): PVDF (polyvinylidene fluoride)
Seal type: Sealless (SL)
Static seal (material): no seals in contact with the medium
Suitable media: Chloric acid, Chromic acid, Hydrofluoric acid, Natriumhypochlorit, Nitric acid, Schwefelsäure
Thread (inch) external: 1"
Viscosity (up to max. mPas)*: 400
Voltage (V): 21,6

* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Accessory Items

slide 1 to 2 of 2

Accessory Items

slide 1 to 4 of 4